Features:
Our Vermeer 9" Brush Chipper is a professional model brush chipper for grinding up old brush and tree limbs. It's 35 HP electric start gasoline powered engine and heavy 33" cutter flywheel provides plenty of power to get the job done fast. Many brush chippers are rated at a given capacity, typically 6". This is the height of throat but branches aren't straight and often have stubs sticking out the side that prevent them from entering a 6" square feed chute. Our 9" chipper has a 9" high chute but it is 14" wide so that you can easily feed branches through that are odd shapes. This design, plus the 330 lb. flywheel and 35 HP motor makes this a highly productive chipper that will save you time and much of the chain saw trimming required to pass branches through a 6" chipper. Once you use this chipper you'll never want to use a 6" chipper ever again.

The electronic hydraulic feed system helps control the feed rate according to engine RPM. Just feed your brush in with a normal workflow and if you come up against a larger limb than usual the hydraulic feed will automatically pause to allow the engine to catch up if the engine RPM drops below a given level. This makes for fast, smooth feeding under any conditions. The directional chute can be aimed to stack the chips on a pile on the ground or load a truck or trailer. It is easy to handle and the 14" diameter tires make it is easy to maneuver by hand into tight areas. The safety bail allows for instant stops or reversals of the feed mechanism and is conveniently located close to the operator for quick emergency stops if needed. The Vermeer BC9000XL chipper requires a 2" trailer ball and can be pulled behind most trucks or SUVs with a class II or better hitch at a minimum 16" ball height with trailer lights hookup.
 

 
See More Lawn and Garden Equipment
Back to Main Rental Catalog