|
HVLP Fine Finish Paint Sprayer
|
|
|
Features:
Our Devilbiss FLG-4 Finish Line HVLP Spray gun utilizes High-Volume Low-Pressure (HVLP) tecnology to give you superior
performance and fine finish results with a wide range of materials. Unlike airless paint sprayers, which are designed
for high production rates, the HVLP sprayer utilizes an air compressor to force air through the gun at reduced
air pressures. This minimizes all of the overspray and clouding of the work area typical of traditional paint spray guns. It
also offers tremendous control over the finish application and minimizes runs and sags while delivering an extremely smooth and
flat finish. HVLP guns can be used to spray a wide variety of materials, including stains, lacquers, enamels, or
urethane paints. If you need to spray masonry sealers such as Drylock or any paint with any sand or texture in it this is not
the sprayer for you. If you are spraying these items our
Texture Sprayer would be the perfect choice for you. If you need to cover large areas in minimal time our
Airless Paint Sprayer is probably better designed for that
application. If you are not sure about your application please give us a call and we'll be happy to discuss your job with you
and recommend the proper tool for the job.
If you plan on spraying Latex paint, there are a few differences to keep in mind when compared to spraying with our airless
sprayers. Unthinned latex paint is too thick to atomize so you will need to thin the paint 10-20% in order for it to spray in
an HVLP gun. This will leave a thinner coat that won't totally cover but it will dry super fast so you can spray a second coat
very soon after. For best results a Latex Additive such as Floetrol should be used. This is available at most paint stores so you
should pick some up prior to renting our HVLP sprayer.
This spray gun requires 6 CFM of air volume to operate. A compressor such as our
1-1/2 HP Electric Compressor would be a good choice.
|
Applications:
- Cabinets and Doors
- Wood Furniture
- Automotive Bodywork
- Stairwells
- Railings and Ornamental Work
|
Specifications:
Air Requirements 6
CFM
Cup Size 1 Quart
Nozzle Sizes
1.5, 1.8, and 2.2
|
Rates:
Day
Week
4 Weeks
|
18.00
72.00
|